THE SOLE WORLDWIDE DISTRIBUTOR OF MGI
Tonker 830 is a pile driven machine designed and built to direct ramming of steel cross sections into the ground.
The fundamental elements that compose the Tonker 830 are the tracked undercarriage, which allows the machine to operate on different kinds of grounds, and the hydraulic percussion hammer which, adjustable to different power ranges, allows the driving of poles and steel profiles. The machine operating is guaranteed from the hydraulic energy generated by an oleodynamic device and is activated by an endothermic engine and by an oleodynamic pump that powers the whole system.
The production of the Tonker 830 is performed on a standard model but according to the requests of the client, customised solutions can be provided with columns of different heights (to support the percussion hammer) ranging from 4,500 to 5,500 mm. Furthermore, thanks to the Clamp Extractor that can be supplied by the machine manufacturer upon specific requests from the buyer, it is possible to perform the extraction of the poles from the ground even after beating and without resorting to additional devices.
RAMMING & PILING
The Pile Driver Tonker 830 is a multi-purpose machine, designed and manufactured specifically to ramming metal poles and steel cross section profiles on different types of soil. The Tonker 830 is mainly used for the construction of PV solar plants and, thanks to its many functions which is equipped with, it can be used in various configurations such as screwing, ramming, drilling with auger for soils with loose consistency and rotary drilling in case of high density soils.
The machine is equipped with tracked frame and advanced ramming systems (hydraulic percussion hammer) and drilling (rotating head) which makes it particularly suitable both to movement on unstable and/or uneven terrain and to working on various types of soil.
All the parts of the Tonker 830 are assembled on a sturdy steel frame which ensures a high balance in terms of weight distribution and in the operational phase. In general, the entire design of the machine has been carried out to promote the stability both during movement and during beating and/or drilling operations.
TONKER 830 POSSESSES EUROPEAN CERTIFICATION
Each Tonker 830 model is equipped with a Swinging Head which, thanks to its stability and practicality, allows the rapid insertion of the profiles, wood or steel made, having different cross-sections up to a size of 300 mm. The design (choice of material and shaping) of each head can be made according to the customer’s requests and it will be a function of the type of post to be rammed.
The Tonker 830 is equipped with an Indeco SPA hammer, easy to assemble and that, thanks to its power of 950 Joule and a range of 650÷1500 strokes/min, provide outstanding performances in the ramming step phase, getting production values that reach numbers up to three times higher than the average.
The crawler cart dimensions are relevant, having a length of 2000 mm, width 1980 mm and height 480 mm. These specifications allow a fast and manageable use of the machine even on uneven grounds. The rails can be manufactured with metal bearings and covered with rubber to work on cemented or asphalted surfaces in order to reduce the worn.
The Tonker 830 is powered by a water-cooled low-emission Yanmar 4TNV88-BDYED series diesel engine with low emission of contaminants and low noise impact. The hydraulic pumps have a flow rate of 34 cc at 1000 rpm which corresponds to about 90 litres per minute at full capacity.
COLUMN WITH HEADLIGHT
The column is used as a guide to place the hammer in the correct position in relation to the pile that will be rammed into the ground.
Through this device is possible to apply a force up to 6,000 kg in extraction tests. (Attachment available upon customer request, it is not included in the price of the machine).
PERCUSSION HYDRAULIC HAMMER
It allows to ramming the steel pile into the ground
CATERPILLAR GEAR MOTOR
It transmits the movement to the crawler car
Makes it possible to quickly impose piles of any shape both in wood and steel, with a diameter up to 300 mm.
The design of each beating mass can be carried out at the request of the client based on the type of pole that must be inserted.
It allows to dissipate the excessive heat of the hydraulic oil
INTERNAL COMBUSTION ENGINE
It supplies energy to the hydraulic components of the machine
This component is the positioning plan for the operator to drive the machine with good standards of comfort and safety.
FUEL & HYDRAULIC OIL TANKS
These supply the internal combustion engine and the hydraulic system of the machine
It is available in 2 variants with power of 950 or 1200 Joule, which produce from 620 to 1500 strokes per minute
It contains the device for the transverse movement of the column
height from the ground
oil tank capacity
fuel tank capacity
oil flow rate min
oil flow rate max
power at 3000 rpm
1.Which are the delivery times?
Delivery of the machine is scheduled within one week after purchasing date. Five machines are always available in our warehouse. In case of more orders it can be evaluated and supplied accordingly.
2. What are the delivery methods?
For long distance deliveries, we use appropriate containers to travel by the sea. One container can obtain up to 3 machines for reducing the shipping cost.
3. What are the packaging methods?
The machine will be divided into two parts: body of the machine plus column. It can be easily assembled upon arrival and be used within short time.
4. How long is the warranty?
One-year warrantee from the time of purchase.
5. Which parts does the warranty cover?
The One-year warranty covers the following parts: engine, hammer, distributor, pump and tracks. However, it does not cover the carpentry, the structural parts and the pipes.
6. Is the machine equipped with accessories?
Yes. The machine is equipped with a customized swinging head modelled as per clients need. Other accessories, such clamp extractor, rotary heads, GPS systems and pull-out test systems are available upon request and as additional costs.
7. What are the payment methods?
30% Advance Payment after signing the sales contract and 70% upon delivery of the goods. Other forms of payment are not applicable unless it can be taken into consideration base on quantity of the purchase order.
8. Does the machine have any kind of certification?
Yes. The machine has the EU standard certificate with all the required documents. The CE mark attests that all the essential safety requirements provided for, by the applicable EU directives, have been fulfilled.
Contact us for additional information or to request a quote. Tek Solar will answer you as soon as possible
The Binary By Omniyat
DUBAI – UAE
+971 552 309338
Sun: 8am – 7pm
Mon: 8am – 7pm
Tue: 8am – 7pm
Wed: 8am – 7pm
Thu: 8am – 7pm
Fri: 8am – 7pm